Click here to enter ONLINE STORE to buy Basket Weaving items  

    FREE SHIPPING for orders over $75.  Continental USA only. (lower 48)
 

Enter Basketweaving.com for Q&A and more.

Need Seat Weaving Supplies? Visit
www.seatweaving.org

Click here  
for Gift Suggestions for Basket Weavers.

Camps & Schools
Click Here

Variations on Handle Wrapping and Twisted Handles      Dyeing Your Baskets    Making Baskets Bigger

Shaping Melon Baskets        Basket Weaving with Kids     Dyeing with Black Walnut Hulls    Staining?

How to Cut and Tuck       Gather Natural Materials and Making Rib Baskets    Styrofoam Cup Trick

Adding Covers to Round Reed Baskets      Basketry Base Identification

1. Do we dye our baskets before or after we weave them?
If your baskets are small and you want them to be all one color, it's easiest to weave the basket first. Then mix your dye in a kitchen pail or USG-type bucket. Immerse the basket for the number of desired minutes. This is without a doubt the easiest way to go.
If you want to combine colors, naturally you're going to dye the reed separately and weave the colors as needed. Furthermore, if you're weaving a large basket, the easiest thing to do is to pre-dye the reed. Set the dye color with a glug or two of vinegar in the final rinse. If it's a particularly rich color, as you pick up a reed weaver to weave, wipe the reed with a cloth to remove excess dye.

2. How do I make my basket pattern bigger?
There ARE formulas for this. I personally don't use a formula. I use a tape measure to estimate the spoke length as it's going to run from the top, down the side, across the bottom, up the side again. Add extra length for cutting and tucking. Then you need to figure out the number of spokes. VERY IMPORTANT: you need an odd number of spokes if a centered handle or D-handle is going to be involved. Divide the desired diameter of the basket by the spoke width plus space between spokes. For example, a 12" square base. 12" divided by 1/2" spoke + 1/4" space. 12 divided by 3/4"= 16 spokes.

3. How do I dye with black walnut hulls?
If you're one of the lucky ones with a black walnut tree in your yard, you need to get a plastic trash can to keep your brew in. No need to hull the nuts. The green part is going to produce the dye. Put the nuts in a nylon stocking, mesh onion bag, burlap sack or even an old pillow case. Tie with a strong cord, and tie this cord to the handle of the trash barrel. Cover with water and let soak till you have a nice brown dyebath. Maybe a week. Maybe less. Experiment with it. The bag should keep the dye from getting too messy, but if it still gets chunks of hull, strain out the pieces. Place the basket in the dye until color is as desired. You can use it over and over again. Add more hulls as needed. Add vinegar ( OR ammonia) to keep the mold down. Keep the can covered unless you have a bizarre sense of humor when it comes to the neighborhood raccoons- who are always looking for a swimming hole.

5. Can we use wood stains for baskets?
There are so many "real" basket dyes and stains out there now, that you don't have to. Wood dyes will be much drier. But if you just can't resist that thrifty streak, mix your old wood dye with boiled linseed oil (No, don't boil the linseed oil.) and you'll have a very decent stain that you can paint on, or pour over, or even spray on. Ratio is up to the individual, but start with 2:1. Stain to Boiled Linseed Oil.